Gas Processing & LNG is Produced by Gulf Publishing Holdings LLC



Sempra strikes LNG supply deal with ConocoPhillips

(Reuters) - Sempra Energy said that ConocoPhillips will buy 5 MMtpy of LNG from Phase 1 of the Port Arthur LNG project under development in Jefferson County, Texas.

U.S. oil and gas producers have rushed to back projects to spur domestic LNG development and exports. Western sanctions on Russia have choked an already undersupplied market and put U.S. gas prices and exports into high gear.

ConocoPhillips will acquire 30% of the equity in Port Arthur LNG Phase 1 and will manage the feedgas supply requirements for the facility, the companies said.

Financial terms of the agreement were not disclosed.

The Port Arthur LNG Phase 1 project is expected to produce up to about 13.5 million tonnes per annum of LNG, while a Phase 2 project is under marketing and development. (Reporting by Arshreet Singh; Editing by Krishna Chandra Eluri and Sriraj Kalluvila)


Copyright © 2019. All market data is provided by Barchart Solutions. Futures: at least a 10 minute delay. Information is provided 'as is' and solely for informational purposes, not for trading purposes or advice. To see all exchange delays and terms of use, please see disclaimer.

                                  CMEGroup                                     Icelogo

FEATURED COLUMNS

Editorial Comment
-Lee Nichols
Modern society would not be possible without the use of pipelines to transport natural gas, crude oil and finished products to demand centers.


Optimizing Gas Distribution: Accounting for Changeovers, Regulators, and More

Register Now

Gas distribution systems are critical to the effective operation of many industrial facilities around the world. Despite the importance of these systems, however, opportunities to improve their performance and cost-effectiveness are often missed or misunderstood. Increasing changeover pressure may seem like a good way to improve system flow, for example, but it often does so at the expense of bottled gas. Adding regulators may help you control supply pressure, but it also adds cost to your system. So, how do you know what the ideal gas distribution setup is for you?

Attend this webinar to:

  • Gain a basic understanding of the fluid dynamics that affect pressure control in gas distribution systems, learning to interpret flow curves and recognize phenomena like lockup, droop, and supply pressure effect (SPE)
  • Learn how inlet pressure affects regulator performance and when to specify certain regulator types and configurations to effectively control gas system pressures

Understand the inherent trade-offs between gas utilization and flow capacity and how to select both the right changeover pressure and automatic changeover panel design for your operations.

May 4, 2021 10:00 AM CDT

Register Now

 

Please read our Term and Conditions, Cookies Policy, and Privacy Policy before using the site. All material subject to strictly enforced copyright laws.
© 2022 Gulf Publishing Holdings LLC.